Name: 26L H Class Dust Extractor + Cleaning Kit CTH 576809 By Festool
Brand: Festool
SKU: 8728009
Price: 2149.0 AUD
Availability: InStock

26L H Class Dust Extractor + Cleaning Kit CTH 576809 By Festool

Roll over image to zoom in Click on image to zoom

The 26 litre Festool special application dust extractor is your only answer for safe, efficient hazardous dust removal. Asbestos, mould, fibrous mineral dust, lead, cadmium, nickel, zinc chromate - the carcinogenic and pathogenic dust doesn't stand a chance. With the high power suction turbine and a 99.995% degree of filtration there is no danger to health. The two layer safety filter bag prevents contact with the dust when disposing of the bag. Approved for dust class H.

H Class Dust Extractors are excluded from Festool's 30 Day Money Back Guarantee. H Class Dust Extractors come with standard 12 month warranty. Optional: Festool H Class Dust Extractors Service Policy Main applications:-

For carcinogenic and pathogenic dust
Flexible and clean in the workshop and on-site thanks to compact design
Integral automatic electronic switch-on/shut-off for extraction from electric power tools
Suitable for both wet and dry extraction

Working With Hazardous Dust Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report Test report: ESP Airborne Occupational Exposure Report Important Information Regarding Circuit Breaker Electrical Standard Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded. Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset. When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required. When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn't matched to the application. (e.g.: saw blade not matched to material)

Safe dust removal

Festool's CTH provides maximum safety in the case of carcinogenic and pathogenic dusts such as lead, cadmium, nickel and zinc chromate.

High suction power

Super strong and yet super small, the high power turbine provides considerable higher suction power but takes up very little room.

Maximum utilisation

The flat filter design allows the filter bag to unfold easily and expand to use almost 100% of its capacity. Hold more dust in a more compact extractor.

Safety sealed

The two layer safety filter bag prevents contact with the harmful dust when disposing of the bag.

Customise for your needs

Every extractor can be fitted with add on modules to suit different requirements including air modules, power socket with continuous current and EAA module.

Antistatic Function

Dust extractors and tools with antistatic function to prevent static buildup when working.

Electronic

Speed control for adjusting to the working material.

CLEANTEC Connection System

Integrated bayonet fitting as the connecting element between the extractor and the tool.

Smooth Sleeve Hose

With a smooth exterior which allows it to slide over surfaces perfectly

FlowDetect

Health protection flow sensor which monitors a minimum air speed of 20m/sec and issues a warning if the air speed falls below that value.

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded. Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset. When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required. When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn't matched to the application. (e.g.: saw blade not matched to material) Technical Data:-