6.35mm x 16mm x 1/2" Shank Straight Spoon Flute Router Bit suit Aluminium + Soft Plastic Cutting TSP08 by TruaCut
Roll over image to zoom in Click on image to zoom
6.35mm x 16mm x 1/2" Shank Straight Spoon Flute Router Bit suit Aluminium + Soft Plastic Cutting TSP08 by TruaCut

6.35mm x 16mm x 1/2" Shank Straight Spoon Flute Router Bit suit Aluminium + Soft Plastic Cutting TSP08 by TruaCut

TruacutSKU: 8706953
Price:
$100.00

Tax included Shipping calculated at checkout

Stock:
Re-stocking soon

Pickup available at 23 Exhibition Drive

Usually ready in 24 hours

CLICK HERE to Shop our Sale!

Downloads

Description

6.35mm x 16mm x 1/2" Shank Straight Spoon Flute Router Bit suit Aluminium + Soft Plastic Cutting TSP08 by TruaCut
(1/2") 12.7 x 38mm shank. Used for general routing, grooving etc.Bottom of the bit is ground for general plunging then normal side cutting. Remember that a 1/2" shk bit is no stronger that of the narrowest section of the bit. eg. A 6mm dia. TM1406 (1/2"shk) bit is generally no stronger than the same size with 1/4" shank. But a 12mm dia. bit with 1/2" shk. has a longercut and is stronger than the 1/4" shk. Bit. Extra long cut bits (X/L cut) are ideal for use in Router benches when trimming or planning the edge of timber instead of using your power plane. This planning method makes sure you plane your job square to the main surface.
Solid tungsten carbide for cutting aluminium and some soft plastic. When cutting Aluminium use a wax stick lubricant.
Specification:-
  • A =6.35mm
  • B = 16mm
  • C = 57mm
  • Shank = 1/2"
  • Two Flutes
  • Suit Aluminium + Some Soft Plastic Cutting

Additional Information

Model
Type
Router Bit
SKU
8706953
Part Number
TSP08
Barcode
9326186009011
Brand
Truacut
Technical - Main
Diameter
6.35mm
Material
Solid Tungsten Carbide
Packaging + Shipping
Shipping Weight (Gross)
1.48kg
Product Specification Disclaimer
Product Specification Disclaimer
Product Specification Disclaimer
The specifications provided on our product pages are obtained from various manufacturers and third-party sources. While we strive to ensure that the information is accurate, we do not warrant or guarantee its accuracy, completeness, or timeliness. Therefore, we cannot be held liable for any errors, omissions, or discrepancies in the specifications provided.Please note that product specifications are subject to change by the manufacturers without notice. It is recommended to verify the specifications with the manufacturer or seller before making a purchase decision.In the event of any discrepancy between the product specifications on our website and the actual product, the latter shall prevail.We reserve the right to update, modify, or remove product specifications at any time without prior notice.

What's Included

6.35mm x 16mm x 1/2" Shank Straight Spoon Flute Router Bit suit Aluminium + Soft Plastic Cutting TSP08 by TruaCut
$100.00

Optional Accessories

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

hidden

Shop Sale

View all
Save 33%
15ml Bottle of Acrylic Liquid Laminate15ml Bottle of Acrylic Liquid Laminate
Liquid Laminate 15ml Bottle of Acrylic Liquid Laminate
From $8.00 $12.00
1 review
In stock
Save 23%
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - EachViking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Viking Arm Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
From $247.00 $320.00
2 reviews
In stock
Save 13%
Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
Midwest Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
$100.00 $115.00
No reviews
In stock
Save 48%
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Rikon *Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
$137.00 $266.00
No reviews
Only 12 units left
Save 64%
Cobalt Drill Bit by Marlin
Marlin Cobalt Drill Bit by Marlin
From $4.00 $11.00
No reviews
In stock, 1825 units
Save 28%
Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
Leatherman Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
$92.00 $128.00
No reviews
In stock
Save 33%
Kincrome 14 Piece Permanent Marker Case Set P11898
Kincrome Kincrome 14 Piece Permanent Marker Case Set P11898
$16.00 $24.00
No reviews
In stock
Save 43%
250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
Rikon 250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
$366.00 $640.00
4 reviews
In stock
Save 75%
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sontax Drill Buddy Dust Catcher / Collector 90900 by Sontax
$2.00 $8.00
No reviews
In stock, 294 units
Save 63%
4Pce Flux Core Solder 10 Gram 18235 by Sontax
Sontax 4Pce Flux Core Solder 10 Gram 18235 by Sontax
$3.00 $8.00
No reviews
In stock
Save 13%
12V 3.0Ah Rotary Tool 8260-5 (F0138260NA) by Dremel12V 3.0Ah Rotary Tool 8260-5 (F0138260NA) by Dremel
Dremel 12V 3.0Ah Rotary Tool 8260-5 (F0138260NA) by Dremel
$216.00 $247.00
1 review
In stock
Save 40%
8M Control Series Tape Measure CS58SI4 by Lufkin
Lufkin 8M Control Series Tape Measure CS58SI4 by Lufkin
$15.00 $25.00
No reviews
In stock

You may also like

Recently viewed

Let customers speak for us

from 266 reviews
Rikon 9mm (3/4") x 13mm (3/8") Universal Mitre Gauge 13-912
Ofer Y.

Good

Rikon 9mm (3/4") x 13mm (3/8") Universal Mitre Gauge 13-912
5m x 22mm x 0.4mm Pre-Glued (Iron-on) (Hang Sell Pack) Tasmanian Blackwood Timber Veneer Edging
Gordon K.
Timber Veneer Edging

Smooth transaction exactly what I wanted and will use you again.

5m x 22mm x 0.4mm Pre-Glued (Iron-on) (Hang Sell Pack) Tasmanian Blackwood Timber Veneer Edging
12V Cable Stapler Kit M12BCST302B by Milwaukee
G.T.

.

12V Cable Stapler Kit M12BCST302B by Milwaukee
Neil L.
Beyond tools

Beyond tools had the item in stock. The posted to NZ no issues. Great service and updated the shipping information as well.
I have been to the shop back in 2016. It's my Uncles favourite store.

Beyond Tools
Dust Extraction hood for use on VS 600 Joiner for OF 1400 492585 by Festool
Neil L.
Dust hood

A great add on to have. Better than the dust and chips going everywhere. I had a used kit and the original was missing. Thanks Beyond Tools

Dust Extraction hood for use on VS 600 Joiner for OF 1400 492585 by Festool
Robin A.
Sales

Very good pricing dam quick shopping hassle free sale.

Beyond Tools
Extension Bed 70-901 suit 70-220VSR by Rikon
Robin A.
Rikon wood lathe

Big, solid well machined lump of steel. Fits nicely to main frame body of lathe.
Beyond tools made it all very easy, great price great postage price and well packaged.

Extension Bed 70-901 suit 70-220VSR by Rikon
18V 4Pce Combo Tool Kit 220540 by Katana
Gordon T.

Works great does what I need

18V 4Pce Combo Tool Kit 220540 by Katana
150mm (6") Dust Hose Y Connector (Twin Outlet) Fitting to 2 x 100mm (4") Outlet YW1064 by Oltre
Paul B.

Perfect, great fit, quality and service.

150mm (6") Dust Hose Y Connector (Twin Outlet) Fitting to 2 x 100mm (4") Outlet YW1064 by Oltre
V. F.
Availability

Thank you for shipping here! A lot of others won't. Have a great day and a smooth seven!!!

Beyond Tools
Folding Utility Knife Tri Blade K6101 by Kincrome
V. F.
Tri blade

Bought both the dual and tri blade. Really like them. Well built and lots of use coming. Thank you guys!

Folding Utility Knife Tri Blade K6101 by Kincrome
Folding Utility Knife Twin Blade K6102 by Kincrome
V. F.
Dual blade utility knife

Great tool, thank you!

Folding Utility Knife Twin Blade K6102 by Kincrome
Chris W.

Thanks

Beyond Tools
Spare Buffers for Hedge Shears R440V-R516V by Bahco
Chris W.

All's fine
Thanx

Spare Buffers for Hedge Shears R440V-R516V by Bahco
80oz (2.25kg) Dead Blow Hammer K9235 by Kincrome
Ugurcan E.
Kincrome Dead Blow Hammer

Amazing quality, fast delivery time. The product is in perfect and brand new condition. Honestly I couldn't be more happier. And the price compared to other markets were much cheaper. I recommend the product and the store to everyone.

80oz (2.25kg) Dead Blow Hammer K9235 by Kincrome