Metabo 18V 4.0Ah Brushless Cordless 2Pce Combo Kit AU68201840

Contents

• 1x METABO 18V Brushless 130Nm LTX Hammer Drill Skin 602360850
  • Brushless hammer drill with maximum power for demanding applications
  • Hammer drill function for drilling in masonry
  • Selectable ""impulse"" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
  • Precision Stop: electronic torque control with increased precision for precise, delicate working
  • Electronic safety shutdown: no kickback if the drill bit stops unexpectedly - for high user safety
  • Integrated LED work light with night light function for optimal brightness in the work area
  • With handy belt hook and bit case which can be fixed either on the right or left side
    
• 1x METABO 18V 1/2inch Impact Wrench Skin
  • Metabo brushless motor 
  • Overload protection 
  • Exceptionally compact design 
  • High torque 400 Nm 
  • Twelve speed/torque levels for a wide range of applications Integrated work light 
  • Robust die cast aluminium gear housing
    
• 2x METABO 18V 4.0ah LI-HD Battery 625367000
  • LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented “AIR COOLED“ charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • Capacity display with almost no self-discharge
  • One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com
  • Battery pack voltage: 18 V
  • Battery pack capacity: 4 Ah
    
• 1x METABO 12-36V Air Cooled Battery Charger ASC55 627047000
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • Battery voltage: 12 - 36 V
  • Mains voltage: 220 - 240 V
  • Mains frequency: 50 - 60 Hz
    
• 1x METABO MetaBOX 165 L