200mm Diamond Wheel Extra Fine 1200G Suit T-4 DE-200 by Tormek

The Tormek DE-200 Diamond Wheel Extra Fine is the diamond wheel that provides an extra smooth finish and is especially suited to carving tools and knives with minimal steel removal needs. The grit size is 1200.

• Provides an extra smooth finish.
• Constant shape, always maintains the same diameter.
• Sharpens all types of steel and ceramic.
• Allows sharpening on the side of the grinding wheel to get a completely flat bevel.
• Exceptional durability with diamond, the world's hardest abrasive.

Structure: • Tormek's Diamond Wheels are constructed with a precision machined steel frame. • The frame is coated with a single layer of diamond grit that is electrolytically anchored with nickel. • When the coated abrasives are touched by the filings of metal from your tool, they will reach the steel frame through the pores that occur in the nickel coating and exposing the steel core. • Therefore, always use the ACC-150 Anti-Corrosion Concentrate in the water when sharpening with water to prevent rust on the grinding wheel. • Add 10 ml of concentrate to 250 ml water (~4%). • We recommend to always use water when sharpening with the diamond wheel, as it prolongs the life of the wheel and provides a finer surface. • It is also possible to sharpen without water. • Important When wet grinding, always use the ACC-150 Anti-Corrosion Concentrate in the water to prevent rust on the grinding wheel. • The Tormek Diamond Wheels is suitable for all types of material, incl. steel, ceramic and carbide. Important when using: • Always apply a low pressure when sharpening. • Apply a very low pressure when sharpening with a new diamond wheel. • The diamond grits on a new diamond wheel are very sharp and sensitive to high pressure. • At first usage, the diamond surface will seem aggressive, so you should expect to feel and hear that some diamond grits stand out. • After a short break-in period, the diamond crystals will stabilize to a uniform level to give a finer surface. • This process normally takes 2–5 sharpenings. • Do NOT use the TT-50 Turning Tool on the Diamond Wheel. • There is no need to true the wheel.