Description
8kg Oak Wood Filler / Putty (Water Based) by Timbermate
Timbermate Woodfiller is an Interior grade 4 in 1 Woodputty, Grainfiller, Edgefiller and Crackfiller. When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram. The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents. Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings. The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.
Full Manufacturer Warranty
Timbermate is proudly 100% Australian made and 100% Australian owned.
Colours Available:-
- Brushbox
- Cedar
- Ebony
- Hardwood
- Jarrah
- Mahogany
- Maple
- Natural
- Oak
- Pine
- Rimu
- Teak
- Walnut
- White
EDGEFILLER
Apply TIMBERMATE with a spatula or knife using hand pressure to force into the Edge or End of the grain.
For spray gun use stir 10% - 15% water into TIMBERMATE fit a 2mm mozzle and set pressure to 60psi. Boards can be stacked for easy spraying. Allow to dry and sand with a fine grit paper and apply topcoat.
WOODFILLER/WOOD PUTTY
Fills cracks, knots, pin and screw holes, splits, blemishes, etc. Fill deep holes in layers allowing time for each layer to dry. Will not blind natural wood grain. Drying time is about 30 minutes. TIMBERMATE dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time."
You can speed dry TIMBERMATE by adjusting the surrounding air temperature. This can be done by using either hot air, heat lamps, or kiln ovens. TIMBERMATE can be mixed with any stains before or after filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades.
Use white TIMBERMATE only for white top coats.
GRAINFILLER
Mix 10% to 15% water into TIMBERMATE to make a perfect Grainfiller, Sanding Sealer and Prime Coat all in one application. First sand surface and with fine grit sandpaper, then apply Grainfiller to surface with a spray gun, paint roller, hessian or a cloth rolled into a ball, rub across the grain in a circular motion finishing with the grain. Sand, once filler is dry, to perfection with either sandpaper or power sander, using a fine grit paper. Grain filer can be used in a Roller or Curtain Coater or Spray Gun using a 2mm nozzle and 60psi pressure. Can be further thinned down with water if required.
MDF
Due to the finishing system used to manufacture MDF it is essential to seal the job with a water based non-acrylic product before applying top coats. Therefore TIMBERMATE meets your needs.
FLOORING
PREPARING OLD FLOORS
Scrape all dust and waste between boards and surface as well as from knot holes and nail heads, vacuum well and carry out first sanding to prepare for filling and coating. Ensure that floor is stabilised, dry and free of movement.
APPLICATION NEW FLOORS AND PREPARED OLD FLOORS
Fill cracks, knot and nail holes and all blemished with a putty knife. Fill deeper holes in layers of about 6mm allowing each fill to dry. Apply TIMBERMATE to entire floor, as a sealant, using a squeegee, trowel or paint roller. Allow to dry and sand off with a fine paper - 120 to 150 grit is recommended for best results. Floor can now be stained or varnished.
Additional Information
8kg Oak Wood Filler / Putty (Water Based) by Timbermate
$125.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Spring Sale
Save 34%
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom $8.50
Regular price$12.95
In stock
Save 45%
GearWrench
14Pce 72T 12 Point Stubby Ratcheting Metric / Imperial Combo Wrench Set 85206 by Gearwrench
Sale price$99.00
Regular price$179.00
Only 8 units leftSave 64%
Save 7%
Midwest
Offset Aviation Snip 3Pce Set MWT-6510RLS by Midwest *Limited Edition*
Sale price$125.00
Regular price$135.00
In stockSave 47%
Komelon
*Limited Edition* Powerblade II Tape 8m/26' 27mm Blade Width 60th Anniversary Gold Edition MPT87EK by Komelon
Sale price$17.95
Regular price$33.95
In stockSave 49%
Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price$149.00
Regular price$289.95
In stock, 30 unitsSave 32%
Milwaukee
50m (165') Laser Detector 48351211 by Milwaukee
Sale price$129.00
Regular price$189.00
Re-stocking soonSave 75%
Sontax
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sale price$1.95
Regular price$7.95
In stock, 312 unitsSave 69%
Save 10%
Save 41%
Lufkin
8M Control Series Tape Measure CS58SI4 by Lufkin
Sale price$15.95
Regular price$26.95
In stockYou may also like
Recently viewed
Let customers speak for us
Tony L.
Good sturdy piece of kit
Firstly the delivery was fast and the transaction simple. Thanks. The Bosch is well built, has the power to tackle some thick growth and you can get a second battery 8amp by redemption free. Happy I selected the bundle and the dealership.
18V Brushless 1 x 5.0Ah 2-In-1 Line Trimmer & Brushcutter Kit - 061599263M by Bosch
roy s.
Just Great....
Great company, great support, great product.
Arbortech SpheroPlane™ (AU + UK) Carving Attachment with Sanding Kit SPP.FG.1000.00
Matthew B.
Great quality as always from marples
As with all of the rosewood marbles tools, great quality. Now I just need to stop the students from damaging them.
Half Round Inlaid Brass Plated Face Walnut Marking Gauge 6 by Joseph Marples
Chris B.
No problem with the whole transaction
Fly Spray Fast Acting 200g by Australian Export
Gui M.
Simple and easy
Good price easy transaction and good delivery
Beyond Tools
Gui M.
Easy transaction
Bought as a present. Easy transaction, good delivery.
MT Series 100mm (4") Belt Sander M9400B by Makita
Wes F.
Rikon 10-326 14" deluxe bandsaw
So far 5 stars. Easy to assemble and the mobility kit is great must have! Easy to adjust and use but time will tell.
350mm (14″) Deluxe Bandsaw with 2820mm x 4-19mm Blade with Storage Cabinet 1.5HP 240V 10-326 by Rikon
Diana B.
Great service and item
Thank you for a quick & easy transaction
Horizontal Base for the Universal Support XB-100 by Tormek
Jeremy K.
Excellent
Wonderful fast shipping and delivery. Awesome business.
200-220mm x 80-90mm Assorted Round Camphor Woodturning Blank
Mark D.
Brad Point
Took was exactly what I needed to complete my project. Great quality. Left a beautiful smooth hole.
11.5mm Brad Point / Wood Drill Bit 601 by Star-M
Owen D.
Perfect adapter
Exactly what’s required to convert my lathe headstock to fit an old but reliable chuck.
Lathe Chuck Adaptor M30 x 3.5mm (Female) To 1" x 8 TPI (Male) by Oltre
Adrian D.
Very good 👍
1/4" Square Drive Socket Set with Metric Hex Profile and Socket Drivers - S460 by Bahco
John G.
Item in excellent condition, good price, speedy delivery.
18V 184mm FUEL™ Rear Handle Circular Saw Bare (Tool Only) M18FCSRH66-0 by Milwaukee
Gareth G.
Arrived well packaged and works great, good doing business with yourselves
Mill Drill Universal MDU by Woodcut Tools
Rusty E.
The right one
Due to a lack of support for Jet bandsaws in my country, finding a replacement tire for mt 18” saw was difficult!! I nearly got scammed by some mob in Europe until I found Beyond Tools. This tire is perfect and won’t be supplied by the manufacturer out of America so for me this has been the best solution
450mm (18") Bandsaw Tyre TQ18 by Carter
