Description
*Shop-Soiled - New Old Stock*
A linear guideway makes it possible to move in a linear motion with rolling elements. The use of balls and rolls between the rail and block in a linear guideway makes precise linear movements possible.
Technical Data:-
Static load rating C0
If a linear guideway system is subjected to excessive loads or impacts during movement or at a standstill, localised permanent deformation occurs between the track and balls. As soon as this permanent deformation exceeds a certain level, it affects smooth operation of the guideway. According to its basic definition, the static load rating corresponds to a static load that causes permanent deformation of 0.0001 × ball diameter at the contact point that is loaded the most. The values are given in the tables for each linear guideway system. Using these tables, the designer can select a suitable linear guideway system. The maximum static load to which a linear guideway system is subjected must not exceed the static load rating.
Permissible static moment M0
The permissible static moment is the moment which, in a defined direction and size, corresponds to the maximum possible load on the moving parts by the basic static load rating. The permissible static moment is defined for linear motion systems for three directions: MX, MY and MZ.
Solid steel block SE
For continuous operation at temperatures above 80? °C, solid steel blocks with steel deflection systems are used. The standard end seals are replaced by heat-resistant end seals and the plastic cover caps of the profile rail by brass cover caps.
HIWIN coating HICOAT CZS
HICOAT CZS is a very thin zinc coating that offers a very good corrosion protection, even on radii and chamfers. Smaller bare parts stay protected by the cathodic corrosion protection. Compared with uncoated pieces this leads to significantly higher periods of use. The CZS coating is available for the HG, EG and CG series. Further information can be found in the catalogue "Linear Guideways" under chapter "HIWIN coatings for linear guideways".
HIWIN coating HICOAT CTS
HICOAT CTS is a thin layer chrome coating that offers good corrosion protection and a very high wear protection. The high wear protection results from the extraordinary hardness of the coating. The CTS coating is free of Cr(VI) and suitable for use in food stuffs. It is available for the HG, EG, CG and WE series. Further information can be found in the catalogue "Linear Guideways" under chapter "HIWIN coatings for linear guideways".
Long-time lubrication unit E2
The long-time lubrication unit considerably increases lubrication intervals. Depending on the application and ambient conditions, it can achieve lifetime lubrication. It also considerably reduces lubricant consumption, as only the required quantity of lubricant is applied. The compact construction and special design allows the block to be fitted in any position without impairing the lubrication function. The long-time lubrication unit can be used at ambient temperatures of -10 °C to +60 °C.
Additional Information
Model
Type
SKU
9501537
Part Number
HGW25CCZ0H
Brand
Hiwin
Packaging + Shipping
Shipping Weight (Gross)
1.48kg
*Shop-Soiled* Linear Guideway Block suit CNC HGW25CCZ0H by Hiwin
$175.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Sale
Save 34%
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom $8.50
Regular price$12.95
In stockSave 38%
Kincrome
*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
Sale price$24.95
Regular price$39.95
Only 2 units leftSave 17%
Viking Arm
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Sale priceFrom $289.00
Regular price$349.00
In stockSave 16%
Midwest
Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
Sale price$99.95
Regular price$119.00
In stock, 28 unitsSave 49%
Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price$149.00
Regular price$289.95
In stock, 20 unitsSave 28%
Leatherman
Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
Sale price$99.95
Regular price$139.00
Re-stocking soonSave 75%
Sontax
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sale price$1.95
Regular price$7.95
In stock, 307 unitsSave 35%
Kincrome
Kincrome 14 Piece Permanent Marker Case Set P11898
Sale price$16.95
Regular price$25.95
In stockSave 45%
Kincrome
*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
Sale price$219.00
Regular price$399.00
Only 8 units leftSave 69%
Save 10%
Save 6%
Dremel
6 in 1 VersaTip Butane Soldering Torch Kit 2000-6 (F0132000JA) by Dremel
Sale price$94.00
Regular price$99.95
In stockYou may also like
Recently viewed
Let customers speak for us
Patrick D.
Awesome for DIY automotive body work. Plenty of power, comfortable, and small enough to do detail work on bumpers etc. Have used this with a vacuum for dust extraction, and it's kept the mess under control.
125mm (5") 280W Random Orbital Sander DWE6423-XE by DeWalt
Patrick D.
Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Patrick D.
Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Patrick D.
Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Gordon P.
Floor stock as new in box, excellent.
MT Series 185mm (7-1/4") Circular Saw M5802B by Makita
Glen K.
Fast delivery and item is as ordered. Thanks
Replacement Rip Fence Assembly to suit MLT100 Table Saw JM27000202 by Makita
Paul S.
Very happy
Very happy
Toughcut Replacement Threaded Steel T Slot to suit Holding Down Clamps
Leigh V.B.
Very happy
Anti-Corrosion Concentrate ACC-150 by Tormek
Terry T.
Great service and excellent customer satisfaction
Beyond Tools
Terry T.
Great quality and service from Beyond tools...
*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
Grant W.
Bandsaw
Enjoying the new flexibility of owning a bandsaw for the first time. Pretty happy with the saw, although the fence is quite flimsy as is the miter gauge.
250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
Mark L.
Great set
Great tools and service
72-Tooth 12 Point Open End Ratcheting Combination SAE Wrench Set 8Pce - 85599 by Gearwrench
Vincent T.
8mmx 100mm carbide tipped straight shank porcelain taile drill bit cutter
Very happy with purchase!
8mm x 100mm Carbide Tipped Straight Shank Porcelain Tile Drill Bit Cutter CTCP08.0 by Armeg
Piotr Z.
Perfect
Bottle Opener TorqueMaster K5641 by Kincrome
CHAO C.H.
Kincrome drain plug set
Fast delivery n Absolutely choosing Beyond tools
15Pce 1/2" Magnetic Drain Plug Set K8157 by Kincrome
