175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox
Roll over image to zoom in Click on image to zoom
175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox

175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox

InoxSKU: 8715674
Price:
$26.00

Tax included Shipping calculated at checkout

Stock:
In stock (3 units), ready to be shipped

Pickup available at 23 Exhibition Drive

Usually ready in 24 hours

CLICK HERE to Shop our Sale!

Downloads

Description

175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox
NOX-M12 PTFE SUPA GLIDE is a fast drying, resin bonded polytetrafluoroethylene dry film lubricant for the coating of timber, metal, plastic, rubber, glass and most other surfaces. It is designed for low-friction, light load repetitive stresses that allows moving parts to wear longer, work harder and require less maintenance and has applications where other conventional sintered PTFE coatings cannot be considered.
Features:-
  • Excellent lubrication qualities
  • Good surface adhesion
  • Hard abrasion-resistant surface
  • Clean and easy to apply
  • Thin film
  • Longer wear life than pure PTFE coatings
  • Cures at room temperature
  • Inhibits corrosion
  • Doesn't wash off with water
  • Resists contamination from dirt and dust
  • Life-long lubrication in many applications
Applications & Use:-
The surface to be coated must be clean, dry and free of any contaminants such as dust, oil, grease or powder. Information on surface preparation for more critical applications is listed below. Once the surface area has been prepared, spray a liberal coating on the area you want to lubricate and then allow time for the carrier and propellant gas to evaporate. Curing times are listed below.
  • WOOD – Sand lightly and wipe clean
  • STEEL – Degrease or sandblast
  • STAINLESS STEEL – Degrease or sandblast
  • ALUMINIUM – Degrease, sandblast or anodize
  • COPPER ALLOYS – Degrease, sandblast and/or acid etch
  • RUBBER, PLASTICS, GLASS – Clean with a solvent that will not affect the substrate
INOX-mx12 PTFE SUPA GLIDE will cure at room temperature. Coatings are touch dry in about 5 minutes, dry enough to handle in 20-30 minutes depending on the film thickness. Optimum hardness for the best lubrication performance is 2 hours. You have to allow at least 2 hours from application before use. Overnight curing will give the best long term results.High humidity may increase opacity or blush and exposure to strong sunlight may cause darkening, but these will not affect the coating performance. Resources:-

Additional Information

Model
Type
Lubricant
SKU
8715674
Part Number
MX12-175
Barcode
9317550006040
Brand
Inox
Size
175g
Packaging + Shipping
Shipping Weight (Gross)
1.48kg
175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox
$26.00

Optional Accessories

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

hidden

Shop Sale

View all
Save 33%
15ml Bottle of Acrylic Liquid Laminate15ml Bottle of Acrylic Liquid Laminate
Liquid Laminate 15ml Bottle of Acrylic Liquid Laminate
From $8.00 $12.00
1 review
In stock
Save 38%
*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
Kincrome *Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
$23.00 $37.00
2 reviews
Only 2 units left
Save 17%
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - EachViking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Viking Arm Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
From $265.00 $320.00
1 review
In stock
Save 16%
Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
Midwest Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
$92.00 $110.00
No reviews
In stock, 28 units
Save 48%
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Rikon *Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
$137.00 $266.00
No reviews
In stock, 20 units
Save 28%
Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
Leatherman Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
$92.00 $128.00
No reviews
Re-stocking soon
Save 75%
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sontax Drill Buddy Dust Catcher / Collector 90900 by Sontax
$2.00 $8.00
No reviews
In stock, 307 units
Save 33%
Kincrome 14 Piece Permanent Marker Case Set P11898
Kincrome Kincrome 14 Piece Permanent Marker Case Set P11898
$16.00 $24.00
No reviews
In stock
Save 45%
*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
Kincrome *Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
$201.00 $366.00
1 review
Only 8 units left
Save 63%
4Pce Flux Core Solder 10 Gram 18235 by Sontax
Sontax 4Pce Flux Core Solder 10 Gram 18235 by Sontax
$3.00 $8.00
No reviews
In stock
Save 10%
Viking Arm® Cabinet Installation Kit CIK
Viking Arm Viking Arm® Cabinet Installation Kit CIK
$129.00 $143.00
1 review
In stock
Save 5%
6 in 1 VersaTip Butane Soldering Torch Kit 2000-6 (F0132000JA) by Dremel6 in 1 VersaTip Butane Soldering Torch Kit 2000-6 (F0132000JA) by Dremel
Dremel 6 in 1 VersaTip Butane Soldering Torch Kit 2000-6 (F0132000JA) by Dremel
$87.00 $92.00
No reviews
In stock

You may also like

Recently viewed

Let customers speak for us

from 209 reviews
125mm (5") 280W Random Orbital Sander DWE6423-XE by DeWalt
Patrick D.

Awesome for DIY automotive body work. Plenty of power, comfortable, and small enough to do detail work on bumpers etc. Have used this with a vacuum for dust extraction, and it's kept the mess under control.

125mm (5") 280W Random Orbital Sander DWE6423-XE by DeWalt
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Patrick D.

Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.

Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Patrick D.

Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.

Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
Patrick D.

Great for DIY automotive body work when paired with an interface pad. No issues removing and reinstalling, they have good Velcro grip.

Abrasive Disc 125mm Hook & Loop 8 Hole GLS5 PS 33 BK for Random Orbital Sanders by Klingspor
MT Series 185mm (7-1/4") Circular Saw M5802B by Makita
Gordon P.

Floor stock as new in box, excellent.

MT Series 185mm (7-1/4") Circular Saw M5802B by Makita
Replacement Rip Fence Assembly to suit MLT100 Table Saw JM27000202 by Makita
Glen K.

Fast delivery and item is as ordered. Thanks

Replacement Rip Fence Assembly to suit MLT100 Table Saw JM27000202 by Makita
Toughcut Replacement Threaded Steel T Slot to suit Holding Down Clamps
Paul S.
Very happy

Very happy

Toughcut Replacement Threaded Steel T Slot to suit Holding Down Clamps
Anti-Corrosion Concentrate ACC-150 by Tormek
Leigh V.B.

Very happy

Anti-Corrosion Concentrate ACC-150 by Tormek
Terry T.

Great service and excellent customer satisfaction

Beyond Tools
*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
Terry T.

Great quality and service from Beyond tools...

*Limited Edition* Kincrome 42Pce 1/2" Drive Imperial & Metric Socket Set K2098 + K28215 Bonus 6Pce Impact Accessory Set K2098B
250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
Grant W.
Bandsaw

Enjoying the new flexibility of owning a bandsaw for the first time. Pretty happy with the saw, although the fence is quite flimsy as is the miter gauge.

250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
72-Tooth 12 Point Open End Ratcheting Combination SAE Wrench Set 8Pce - 85599 by Gearwrench
Mark L.
Great set

Great tools and service

72-Tooth 12 Point Open End Ratcheting Combination SAE Wrench Set 8Pce - 85599 by Gearwrench
8mm x 100mm Carbide Tipped Straight Shank Porcelain Tile Drill Bit Cutter CTCP08.0 by Armeg
Vincent T.
8mmx 100mm carbide tipped straight shank porcelain taile drill bit cutter

Very happy with purchase!

8mm x 100mm Carbide Tipped Straight Shank Porcelain Tile Drill Bit Cutter CTCP08.0 by Armeg
Bottle Opener TorqueMaster K5641 by Kincrome
Piotr Z.

Perfect

Bottle Opener TorqueMaster K5641 by Kincrome
15Pce 1/2" Magnetic Drain Plug Set K8157 by Kincrome
CHAO C.H.
Kincrome drain plug set

Fast delivery n Absolutely choosing Beyond tools

15Pce 1/2" Magnetic Drain Plug Set K8157 by Kincrome