175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox

InoxSKU: 8715674

Price:
Sale price£15.00

Tax included Shipping calculated at checkout

Stock:
Re-stocking soon

Pickup available at 23 Exhibition Drive

Usually ready in 24 hours

CLICK HERE to Shop our Sale!

Description

175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox
NOX-M12 PTFE SUPA GLIDE is a fast drying, resin bonded polytetrafluoroethylene dry film lubricant for the coating of timber, metal, plastic, rubber, glass and most other surfaces. It is designed for low-friction, light load repetitive stresses that allows moving parts to wear longer, work harder and require less maintenance and has applications where other conventional sintered PTFE coatings cannot be considered.
Features:-
  • Excellent lubrication qualities
  • Good surface adhesion
  • Hard abrasion-resistant surface
  • Clean and easy to apply
  • Thin film
  • Longer wear life than pure PTFE coatings
  • Cures at room temperature
  • Inhibits corrosion
  • Doesn't wash off with water
  • Resists contamination from dirt and dust
  • Life-long lubrication in many applications
Applications & Use:-
The surface to be coated must be clean, dry and free of any contaminants such as dust, oil, grease or powder. Information on surface preparation for more critical applications is listed below. Once the surface area has been prepared, spray a liberal coating on the area you want to lubricate and then allow time for the carrier and propellant gas to evaporate. Curing times are listed below.
  • WOOD – Sand lightly and wipe clean
  • STEEL – Degrease or sandblast
  • STAINLESS STEEL – Degrease or sandblast
  • ALUMINIUM – Degrease, sandblast or anodize
  • COPPER ALLOYS – Degrease, sandblast and/or acid etch
  • RUBBER, PLASTICS, GLASS – Clean with a solvent that will not affect the substrate
INOX-mx12 PTFE SUPA GLIDE will cure at room temperature. Coatings are touch dry in about 5 minutes, dry enough to handle in 20-30 minutes depending on the film thickness. Optimum hardness for the best lubrication performance is 2 hours. You have to allow at least 2 hours from application before use. Overnight curing will give the best long term results.High humidity may increase opacity or blush and exposure to strong sunlight may cause darkening, but these will not affect the coating performance. Resources:-

Additional Information

175g Can PTFE Supa Glide Spray Lubricant MX12-175 by Inox
£15.00

Optional Accessories

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

hidden

You may also like

Recently viewed