22mm x 0.5mm Veneer Edging P/G in Tasmanian Blackwood 290295P/G By Surteco

• Continuous roll form – optimizes edgebanding speed whilst minimizing offcuts and wastage as experienced with short veneer strips
• Staggered finger joints – extra strength and near invisible joints
• Fleeced – strong cellulose backing eliminates splintering, splitting, cracking and breakage during edgebanding – no priming required
• Face Sanded – ready for lacquering after edgebanding
• Original natural veneer – no cheap substitutes from other species
• Wide range – over 40 species in stock
• Australian Made – all veneer edging is manufactured in Sydney, Australia

• Fleeced Veneer can be applied using a wide selection of equipment including hotmelt edgebanders (Click here for more details), hot air edgebanders for pre-glued tapes (click here for more details), ordinary household irons (for preglued stock), or by hand using contact adhesives (click here for more details).
• Most edgebanders’ trimming devices will cut Fleeced Veneer cleanly without difficulty.
• Fleeced Veneer can also be trimmed easily using a sharp blade or handheld edge-trimmer (click here for more details).
• For best results when applying unglued Fleeced Veneer edging, we recommend Hot Melt Adhesive (click here for more details).

Please note other widths are available upon request. Iron-On Timber Veneer Sheets are also available in a limited range of 2440mm x 305mm and 1220mm x 305mm sizes. Please contact us for availability.

Please note timber is a natural species and colours will vary depending on which part of the tree the edging has been cut from.