Jowat Jowatherm Hot Melt Edgebanding Adhesive Pellets 282.30 Series - Suits 10-25m / Min. Edgebanding Speeds

For decades, the trim edges of wood-based materials have been finished with different edgebands. The adhesives used for this purpose must meet special requirements that match the high expectations with regard to the visual appearance of the product, advancing technology and a virtually unlimited variety of materials.

Manual edgebanders as well as automatic edgebanding machines apply a hot melt adhesive to ensure a permanent bonding between the edgebanding material and the carrier board. Those adhesives are solid at room temperature and become a viscous liquid when heated. The typical temperature range for processing EVA hot melt adhesives is between 180 °C (320 °F) and 210 °C (410 °F).

The energy needed for melting the adhesive can be reduced significantly with the low-temperature edgebanding hot melts from Jowat. These adhesives lower the costs due to reduced energy consumption, contribute to the protection of the environment and improve occupational safety by reducing the risk of burning.
Jowat supplies a broad variety of these formulations to meet the wide range of requirements. Jowatherm^® 282.40 is an unfilled product that facilitates particularly thin bondlines. Jowatherm^® 282.20 is considered the ultimate all-round adhesive, which has been used by processors from all over the world for many years. Both adhesives are also available in a white coloured version, thereby catering to the unbroken trend towards white decor surfaces.

Comparable Products

• Unicol Unibord 636 Hot Melt Adhesive