Description
High Quality Veneer Edging for application directly onto wooden substrates such as particleboard, MDF (fibreboard) and plywood - Suitable for Hot Melt Edgebanders or Manual Edgebanding using Virutex AG98R or Iron or other traditional means.
We have the largest range of stocked Edging in Australia supplied by quality manufacturers. We offer Edging Solutions for all users (DIY, Hobbyists, Micro Trade Users through to High Industrial Cabinetry / Furniture makers). We offer Cutting and Pre-Gluing facilities for all of our edging in addition to all the stocked lines - please refer to our Edging Services for more details.
Please note we have a larger range of Veneer Products in 0.4mm and 2mm Thickness and larger Roll Sizes.
Suggested Applications:-- Shelving
- Stereo speaker boxes
- Hobby craft
- Cabinets & cupboard doors
- Renovation of old furniture
Note - Iron-on Timber Veneer Edging is not recommended for application onto metal, glass, or other sealed surfaces.What else will you need?A stiff-bristled brush; Brown or grease proof paper (not vital); A hard roller or flat wooden block (palm-sized); A router, fine file, chisel, or utility knife; Fine sandpaper; Timber stain/lacquer.If applying Iron-On Melamine Edging to laminate or painted surface: Coarse sandpaper and/or paint stripper.
Preparation:-
- Substrate Surface – Remove laminate or paint using coarse sandpaper and/or paint stripper. Clean-up substrate surface using stiff-bristled brush.
- Iron-on Timber Veneer Edging – Measure and cut edging allowing 10mm overlap on each end.
- Domestic Iron – Turn off steam function. Set iron to high heat (cotton setting).
- Position Edging – Lay edging over substrate allowing equal overlap ona ll sides for trimming.
- Cover Edging (not vital) – Cover edging strip with brown or grease proof paper to protect surface of edging from excessive direct heat from iron. (see illustration A)
- Iron-on – Use on hand to guide and keep edging in position. Starting at one end, iron back and forth. Slowly continue forwards. (see illustration A)
-
Follow-up Pressure – Rub wooden block or push roller back and forth immediately after ironing (whilst edging and adhesive still warm) to keep edging in contact with substrate surface as adhesive cools. (see illustration B)
- Note - If result is not acceptable, re-work by repeating steps 3 and 4.
- Trimming – Ideally use a router. Alternatively: With fine file - Move file at close angle (15 º) to surface of board. With chisel or utility knife - Work along surface of substrate. Trim carefully to avoid damaging surface of substrate. In all cases, work away from edging towards surface of substrate to stop edging pulling away.
- Finishing – If required, fine sandpaper trimmed edges to smooth finish. If desired, Iron-on Timber Veneer Edging can be stained. Apply any standard timber finish.
Additional Information
Model
Type
Edgebanding Tape - Veneer
SKU
8703665
Part Number
253-617
Barcode
9313815350576
Brand
Consolidated Veneers
Size
22mm x 0.4mm
Size*
22mm x 0.4mm
Technical - Main
Colour Name
Pacific Maple
Edging - Base Material
Natural Veneer
Edging - Surface
Veneer (Natural Timber)
Edging Thickness
0.4mm
Edging Width
21-22mm
Roll Size
5METERS
Packaging + Shipping
Shipping Weight (Gross)
0.2kg
5m x 22mm x 0.4mm Pre-Glued (Iron-on) (Hang Sell Pack) Pacific Maple Timber Veneer Edging by Consolidated Veneers
£12.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Sale
Save 29%
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom £5.00
Regular price£7.00
In stockSave 24%
Kincrome
*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
Sale price£16.00
Regular price£21.00
In stock
Save 17%
AOS|Sicut
4Pce Sicut Diamond Fisherman Package White Handle Knife Set SCKPFMDMW by AOS
Sale price£71.00
Regular price£86.00
In stock
Save 44%
GearWrench
14Pce 72T 12 Point Stubby Ratcheting Metric / Imperial Combo Wrench Set 85206 by Gearwrench
Sale price£51.00
Regular price£91.00
Only 2 units leftSave 44%
Komelon
*Limited Edition* Powerblade II Tape 8m x 27mm Blade Width 60th Anniversary Gold Edition MPT87EK by Komelon
Sale price£10.00
Regular price£18.00
In stockSave 50%
Makita
*Carton Damaged* 18V 520mm Mobile Hedge Trimmer Bare (Tool Only) DUH523Z by Makita
Sale price£51.00
Regular price£101.00
Sold outSave 13%
Kincrome
150Pce 1/2" Drive Automotive Portable Tool Kit K1870 by Kincrome
Sale price£233.00
Regular price£269.00
In stockSave 49%
Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price£76.00
Regular price£148.00
In stock, 23 unitsSave 67%
Save 11%
EZESharp
Blade Sharpener with 100mm Flip-Over BS1000 by EZESharp
Sale price£147.00
Regular price£165.00
In stockYou may also like
Recently viewed
Let customers speak for us
Jeremy A.
Hey nice
Good quality product amazing for AV gear
330mm Medium Safe Case by 51011 Kincrome
Nancy D.
Fabulous
Everyone ending up getting two each as they loved them so much.Will purchase again next year.Hope they have a few different things in them but I know it’s hard as in size.
*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
Adrian J.
All good!
406mm (16”) Tool Bag - 83147 by Gearwrench
Adrian J.
All good!
All good. Quick delivery. Happy with product-as advertised.
1/4" & 3/8" Drive Standard 6 & 12 Point Metric/SAE Socket 38Pce Set 83067N by Gearwrench
Allan S.
Great little tape measure. Numbers on both sides.
5m x 27mm Powerblade II Tape MBT57 by Komelon
Allan S.
Great little level
Type 70 TMW Spirit 250mm Level by Stabila
Allan S.
Gearwrench 90T
Great set. Excellent back drag. 1/4" body with a 3/8" drive square.
3/8” Drive 90-Tooth Compact Head Teardrop Ratchet 2Pce Set 81253T by Gearwrench
Michelle H.
Black/Silver Saw Blade Wall Clock Each 96002 by Medalist
Black/Silver Saw Blade Wall Clock Each 96002 by Medalist
Michelle H.
Rite in the Rain All Weather (Weatherproof) Universal Pattern Side Spiral Notebook 4.625" x 7"
Rite in the Rain All Weather (Weatherproof) Universal Pattern Side Spiral Notebook 4.625" x 7"
Tracie L.
Great
Great tool
Love that it’s cordless
I purchased for hobby , purchased this one as more powerful so hubby can use for jobs too.
Beyond Tools has best price. Shipped in good time. Very happy 😊
12V 3.0Ah Rotary Tool 8260-5 (F0138260NA) by Dremel
ian b.
You wheel cutter
Super fast postage great product highly recommended
2 Flute – Toy Wheel Cutters 50mm – Carbide Tipped TWCH501/2 by Carbitool
John G.
Exactly what was needed
Great product. Shame it takes so long to be delivered. Not Beyond Tool fault. Just auspost fault.
Holding Down Clamp suit Diamond Series Panelsaws by ToughCut
Olena K.
Nice sturdy organiser
I bought this organiser to carry my jewellery making tools to class. It fits well small pliers and needle files. It's made with good quality textile. Hope it will last for years.
Tool Organiser Wrap with Handle E-05533 by Makita
J.N.
J.N.
Prompt processing of online purchase
Beyond Tools
J.N.
Gift via subtle hints
This Kinchrome set was requested “1/2” drive with lots of sockets please”, this was on sale and seemed to fit the brief.
31Pce 1/2" Socket Set Drive Imperial + Metric K28072 by Kincrome
