Description
High Quality Veneer Edging for application directly onto wooden substrates such as particleboard, MDF (fibreboard) and plywood - Suitable for Hot Melt Edgebanders or Manual Edgebanding using Virutex AG98R or Iron or other traditional means.
We have the largest range of stocked Edging in Australia supplied by quality manufacturers. We offer Edging Solutions for all users (DIY, Hobbyists, Micro Trade Users through to High Industrial Cabinetry / Furniture makers). We offer Cutting and Pre-Gluing facilities for all of our edging in addition to all the stocked lines - please refer to our Edging Services for more details.
Please note we have a larger range of Veneer Products in 0.4mm and 2mm Thickness and larger Roll Sizes.
Suggested Applications:-- Shelving
- Stereo speaker boxes
- Hobby craft
- Cabinets & cupboard doors
- Renovation of old furniture
Note - Iron-on Timber Veneer Edging is not recommended for application onto metal, glass, or other sealed surfaces.What else will you need?A stiff-bristled brush; Brown or grease proof paper (not vital); A hard roller or flat wooden block (palm-sized); A router, fine file, chisel, or utility knife; Fine sandpaper; Timber stain/lacquer.If applying Iron-On Melamine Edging to laminate or painted surface: Coarse sandpaper and/or paint stripper.
Preparation:-
- Substrate Surface – Remove laminate or paint using coarse sandpaper and/or paint stripper. Clean-up substrate surface using stiff-bristled brush.
- Iron-on Timber Veneer Edging – Measure and cut edging allowing 10mm overlap on each end.
- Domestic Iron – Turn off steam function. Set iron to high heat (cotton setting).
- Position Edging – Lay edging over substrate allowing equal overlap ona ll sides for trimming.
- Cover Edging (not vital) – Cover edging strip with brown or grease proof paper to protect surface of edging from excessive direct heat from iron. (see illustration A)
- Iron-on – Use on hand to guide and keep edging in position. Starting at one end, iron back and forth. Slowly continue forwards. (see illustration A)
-
Follow-up Pressure – Rub wooden block or push roller back and forth immediately after ironing (whilst edging and adhesive still warm) to keep edging in contact with substrate surface as adhesive cools. (see illustration B)
- Note - If result is not acceptable, re-work by repeating steps 3 and 4.
- Trimming – Ideally use a router. Alternatively: With fine file - Move file at close angle (15 º) to surface of board. With chisel or utility knife - Work along surface of substrate. Trim carefully to avoid damaging surface of substrate. In all cases, work away from edging towards surface of substrate to stop edging pulling away.
- Finishing – If required, fine sandpaper trimmed edges to smooth finish. If desired, Iron-on Timber Veneer Edging can be stained. Apply any standard timber finish.
Additional Information
5m x 22mm x 0.4mm Pre-Glued (Iron-on) (Hang Sell Pack) Victoria Ash Timber Veneer Edging
£13.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Spring Sale
Save 29%
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom £5.00
Regular price£7.00
In stock
Save 44%
GearWrench
14Pce 72T 12 Point Stubby Ratcheting Metric / Imperial Combo Wrench Set 85206 by Gearwrench
Sale price£53.00
Regular price£95.00
Only 8 units leftSave 50%
Save 7%
Midwest
Offset Aviation Snip 3Pce Set MWT-6510RLS by Midwest *Limited Edition*
Sale price£67.00
Regular price£72.00
In stockSave 44%
Komelon
*Limited Edition* Powerblade II Tape 8m/26' 27mm Blade Width 60th Anniversary Gold Edition MPT87EK by Komelon
Sale price£10.00
Regular price£18.00
In stockSave 49%
Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price£79.00
Regular price£154.00
In stock, 29 unitsSave 32%
Milwaukee
50m (165') Laser Detector 48351211 by Milwaukee
Sale price£69.00
Regular price£101.00
Re-stocking soonSave 60%
Sontax
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sale price£2.00
Regular price£5.00
In stock, 311 unitsSave 60%
Save 13%
Kincrome
150Pce 1/2" Drive Automotive Portable Tool Kit K1870 by Kincrome
Sale price£244.00
Regular price£281.00
Re-stocking soonSave 10%
You may also like
Recently viewed
Let customers speak for us
Richard Z.
Crescent Side Cutter
Product good, delivery good
8" Pivot Action Dual Material Diagonal Compound Action Cutting Pliers CCA5428 by Crescent
Tony L.
Good sturdy piece of kit
Firstly the delivery was fast and the transaction simple. Thanks. The Bosch is well built, has the power to tackle some thick growth and you can get a second battery 8amp by redemption free. Happy I selected the bundle and the dealership.
18V Brushless 1 x 5.0Ah 2-In-1 Line Trimmer & Brushcutter Kit - 061599263M by Bosch
roy s.
Just Great....
Great company, great support, great product.
Arbortech SpheroPlane™ (AU + UK) Carving Attachment with Sanding Kit SPP.FG.1000.00
Matthew B.
Great quality as always from marples
As with all of the rosewood marbles tools, great quality. Now I just need to stop the students from damaging them.
Half Round Inlaid Brass Plated Face Walnut Marking Gauge 6 by Joseph Marples
Chris B.
No problem with the whole transaction
Fly Spray Fast Acting 200g by Australian Export
Gui M.
Simple and easy
Good price easy transaction and good delivery
Beyond Tools
Gui M.
Easy transaction
Bought as a present. Easy transaction, good delivery.
MT Series 100mm (4") Belt Sander M9400B by Makita
Wes F.
Rikon 10-326 14" deluxe bandsaw
So far 5 stars. Easy to assemble and the mobility kit is great must have! Easy to adjust and use but time will tell.
350mm (14″) Deluxe Bandsaw with 2820mm x 4-19mm Blade with Storage Cabinet 1.5HP 240V 10-326 by Rikon
Diana B.
Great service and item
Thank you for a quick & easy transaction
Horizontal Base for the Universal Support XB-100 by Tormek
Jeremy K.
Excellent
Wonderful fast shipping and delivery. Awesome business.
200-220mm x 80-90mm Assorted Round Camphor Woodturning Blank
Mark D.
Brad Point
Took was exactly what I needed to complete my project. Great quality. Left a beautiful smooth hole.
11.5mm Brad Point / Wood Drill Bit 601 by Star-M
Owen D.
Perfect adapter
Exactly what’s required to convert my lathe headstock to fit an old but reliable chuck.
Lathe Chuck Adaptor M30 x 3.5mm (Female) To 1" x 8 TPI (Male) by Oltre
Adrian D.
Very good 👍
1/4" Square Drive Socket Set with Metric Hex Profile and Socket Drivers - S460 by Bahco
John G.
Item in excellent condition, good price, speedy delivery.
18V 184mm FUEL™ Rear Handle Circular Saw Bare (Tool Only) M18FCSRH66-0 by Milwaukee
Gareth G.
Arrived well packaged and works great, good doing business with yourselves
Mill Drill Universal MDU by Woodcut Tools
