*Ex Demo* Festool 26L H Class Dust Extractor + Cleaning Kit CTH 576809 *Discontinued*

Main Applications

• For carcinogenic and pathogenic dust
• Flexible and clean in the workshop and on-site thanks to compact design
• Integral automatic electronic switch-on/shut-off for extraction from electric power tools
• Suitable for both wet and dry extraction

Important Information Regarding Circuit Breaker

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded. Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset. When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.

Features

• Accessories and tools in the Systainer and SORTAINER can be easily attached to the extractor via the SYS dock
• The power cable and suction hose are stored tidily and optimally protected in the permanently integrated Festool hose holder and cable holder
• Extremely powerful, compact and light: The high-performance turbine provides considerably higher suction power and requires very little space
• Double-layer safety filter bag as prescribed for dusts in class H and an additional disposable bag that surrounds the filter bag
• The locking brake ensures that the extractor will remain in place. The large wheels prevent the extractor from tipping over. The wheels can be turned, and the material that they are made from is resistant to wear. Because of the location of its center of gravity, the extractor is easy to carry
• The filter bag is free to unfold because of the flat filter and the smooth inner contours of the container. This allows the bag to be filled uniformly and a nearly 100% utilisation of the filter bag volume
• The extractor is approved for dust class H. It is suitable for extracting harmful dusts with limit values < 0.1 mg/m³. The extractor features a large red label that indicates the dust class
• or dust, dirt and water. When absorbing water, the LevelStop shuts down the drive in good time and the motor remains protected. The wet filter can be set in place with just a few hand movements
• Every extractor can be fitted with add on modules to suit different requirements including air modules, power socket with continuous current and EAA module
• Antistatic hose which prevents static buildup while working
• Speed control for adjusting to the working material
• Integrated bayonet fitting as the connecting element between the extractor and the tool
• Smooth Sleeve Hose allows for the hose to glide over surfaces perfectly
• Health protection flow sensor which monitors a minimum air speed of 20m/sec and issues a warning if the air speed falls below that value

Disclaimer

The CTH 26L H Class Dust Extractor is excluded from Festool's 30 Day Money Back Guarantee

Working With Hazardous Dust Reports

Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report

Test report: ESP Airborne Occupational Exposure Report