MC Bottoming Chrome Tap by Bordo

About this item:

• Chrome Alloy Metric Coarse Bottoming Hand Tap.
  
• Used as thread chasers to clean an existing thread.
  
• They can also be used to create a new female thread in non-ferrous metals and plastics.
  
• Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  
• Metric Coarse angle of thread is 60 degrees.
  
• The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
  
• Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
  
• The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
  
• Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
  
• Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
  

Options

• 4220-3.00B
• 4220-5.00B
• 4220-6.00B
• 4220-2.00B