Milwaukee 3Pce 12V 5.0Ah/2.0Ah REDLITHIUM Cordless Brushless Combo Kit M12FPP3N2BF522HA

Includes

• 1 x MILWAUKEE 12V 1/2" Stubby Impact Wrench with Friction Ring Skin M12FIW2F120
• 1 x MILWAUKEE 12V FUEL™ 1/2inch Right-Angle Impact Wrench Skin M12FRAIWF120
• 1 x MILWAUKEE 12V FUEL™ 3/8inch High Speed Extended Reach Ratchet Skin M12FHIR38LR0
• 1 x MILWAUKEE 12V RedLithium™-Ion 5.0Ah High Output Battery M12HB5
• 1 x MILWAUKEE 12V RedLithium™-Ion 2.5Ah High Output Battery M12HB2
• 1 x MILWAUKEE SHOCKWAVE Impact Duty™ 1/2" Drive Lug Nut Wheel Socket Set - 3 Piece 49667830
• 1 x MILWAUKEE 12V/18V 4.5/6.0Ah Multi Voltage Rapid Charger M12-18FC
• 1 x MILWAUKEE 12V FUEL™ Stubby Impact Wrench Protective Boot 49162562
• 1 x MILWAUKEE FUEL™ 3/8inch & 1/4inch High Speed Extend Reach Ratchet Protective Rubber Boot Accessory 49162569
  

MILWAUKEE 12V 1/2" Stubby Impact Wrench with Friction Ring Skin M12FIW2F120

Our new 1/2” Stubby Impact Wrench delivers maximum power, in a lightweight compact body and delivering 50% faster application speeds when compared to the previous generation. Leveraging POWERSTATE™ Brushless Motor, The M12 FUEL™ Stubby Delivers 0-3,000 RPM with up to 746 Nm of Nut Busting Torque, allowing the removal of corroded and stubborn applications. Our solution delivers on performance and size, at only 0.99 Kg for the bare tool. Users can expect less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. A 4-Mode DRIVE CONTROL™ allows for greater precision. Featuring an AUTO SHUT-OFF™ mode that applies no more than 20 Nm of torque for hand-tight applications that prevent overtightening when in forward. In reverse, Bolt Removal Mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.

• Delivers up to 746 Nm of Nut-Busting torque and up to 542 Nm of fastening torque in a total tool length of 124mm.
• Designed to deliver improved performance in tight access application fastening and loosening tasks.
• Single handed mode change capabilities delivers increased productivity.
• New Tri-LED shadowless lighting delivers high-definition visibility in tight access workspaces.
• Increased performance, lighter weight, and more compact when compared to M18FIW2F12 paired with a M18B5 battery.
• New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack
• Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 Nm of torque.
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode

Specifications

• Platform: M12™
• Anvil Type: 1/2" Sqaure with Friction Ring
• Fastening Torque: 542 Nm
• Nut-Busting Torque: 746 Nm
• DRIVE CONTROL: 4 Mode with Auto Shut-Off Mode & Bolt Removal Mode
• No Load RPM: 0 - 930 / 0 - 2,100 / 0 - 3,000 / 0 - 1,300
• IPM: 0 - 1,500 / 0 - 3,000 / 0 - 3,300 / 0 - 3,300
• Tri-LED Worklight: Yes

MILWAUKEE 12V FUEL™ 1/2inch Right-Angle Impact Wrench Skin M12FRAIWF120

The M12 FUEL™ 1/2" Right Angle Impact Wrench with Friction Ring is a powerful right angle impact wrench. Users will be able to easily remove stubborn bolts and fasteners with up to 300 Nm of nut-busting torque. This cordless right angle impact wrench also gives user's maximum access with ultimate control in hard to reach applications. The durable cordless impact wrench easily fits into tight spaces with a profile head of only 56 mm. This allows users to be more productive by decreasing the need for socket extensions often used with pistol-grip impact tools. The 4-Mode DRIVE CONTROL delivers unmatched control in various fastening and bolt removal applications. Modes 1-3 provide RPM and IPM adjustments for maximum precision, while Mode 4 is equipped with Auto Shut-Off in forward and Bolt Removal Mode in reverse. Auto Shut-Off Mode will prevent over-tightening of bolts by applying no more than 20 Nm of torque. Bolt Removal Mode provides more control by drastically slowing down RPMs once the bolt is loosened. The REDLINK PLUS™ Intelligence ensures maximum performance and protection against overloads, over-heating, and over-discharge. This cordless 1/2” impact wrench is powered by MILWAUKEE® M12™ REDLITHIUM™-ION Battery Packs (not included), which are compatible with all M12™ tools, delivering more work per charge and more work over the life of the pack.

• POWERSTATE™ Brushless Motor delivers the power to complete a wide variety of applications
• Powerful right angle impact wrench with up to 300 Nm nut-busting torque
• 358 mm body (with M12B3) and 56 mm head profile allow for more access in tight, hard to reach spaces
• Auto Shut-Off mode prevents over tightening and increases productivity by applying no more than 20Nm of torque
• Bolt removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Works in up to to 69kV environments
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge

Specifications

• Platform: M12 FUEL™
• Anvil Type: 1/2" Square w/ Friction Ring
• Fastening Torque: 270 Nm
• Nut-Busting Torque: 300 Nm
• DRIVE CONTROL: 4-Mode w/ Auto Shut-Off Mode & Bolt Removal Mode
• RPM: 0-1,550 / 0-2,300 / 0-3,000 / 0-3,000
• IPM: 0-1,350 / 0-2,700 / 0-3,600 / 0-3,600

MILWAUKEE 12V FUEL™ 3/8inch High Speed Extended Reach Ratchet Skin M12FHIR38LR0

The 12V FUEL™ 3/8" High Speed Extended Reach Ratchet is the latest addition to Milwaukee's battery-powered ratchets. The 12V FUEL™ ratchets provide fast cordless speed with a slim head profile and an extended neck that will provide more access in tight spaces. Simultaneously, the recessed forward-reverse shift knob allows users to easily switch between tightening or loosening fasteners. The 3/8" Ratchet provides performance of up to 47.5 Nm max torque, the same torque output as the 12V FUEL™ High Speed Ratchets. The High-Speed Extended Reach Ratchets feature an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that delivers great durability. The cordless ratchet features built-in REDLIINK™ tool technology to help users reduce fatigue and increase productivity.

• Delivers 450 RPM under load
• Extended reach and small head size paired with compact yoke housing allows for easier access in tight spaces
• Recessed forward-reverse shift knob allows users to easily shift between fastening and tightening task without reducing access capabilities
• Higher speed increases productivity and reduces user fatigue by minimising time spent handling tool in tight spaces
• Up to 47.5 Nm of maximum torque output

Specifications

• Chuck Type: 3/8"
• Max Torque: 47.5 Nm
• Ratchet Length: 273 mm
• Head Width: 32.8 x 29.5 mm

MILWAUKEE 12V RedLithium™-Ion 5.0Ah High Output Battery M12HB5

The 12V REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery delivers 25% more power and runs 25% cooler than the 12V REDLITHIUM™-ION 4.0Ah Battery. The increase in power elevates the performance of the entire 12V system and drives the next breakthrough in 12V FUEL™. The lithium-ion battery delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Each battery pack is built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the 12V REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery is built with a resistant housing, increasing the protection against exposure to common oils, greases, and solvents found in transportation maintenance and manufacturing environments. The 12V REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah battery is fully compatible with 125+ 12V solutions.

• 12V REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery runs up to 25% cooler vs M12B4
• Increased thermal protection is optimised for high draw tools ensuring batteries don’t overheat even in the toughest applications
• REDLINK™ intelligence. Provides optimised performance and overload protection
• 12V REDLITHIUM™-ION HIGH OUTPUT™ 5.0Ah Battery delivers 25% more power vs M12B4

Specifications

• Amp Hour: 5
• Voltage: 12V
• Cell Type: HIGH OUTPUT™

MILWAUKEE 12V RedLithium™-Ion 2.5Ah High Output Battery M12HB2

The 12V REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the 12V REDLITHIUM™-ION 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an 12V REDLITHIUM™-ION battery in a lighter and more compact package.

The 12-volt battery pack delivers fade-free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18°C.

In addition, the 12V REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The 12V REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah battery is fully compatible with 125+ M12™ solutions.

• 12V REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery runs up to 25% cooler vs M12B2
• Increased thermal protection is optimised for high draw tools ensuring batteries don’t overheat even in the toughest applications
• REDLINK™ intelligence provides optimised performance and overload protection
• 12V REDLITHIUM™-ION HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power vs M12B2

Specifications

• Platform: M12™
• Amp Hour: 2.5
• Voltage: 12V
• Cell Type: HIGH OUTPUT™

MILWAUKEE SHOCKWAVE Impact Duty™ 1/2" Drive Lug Nut Wheel Socket Set - 3 Piece 49667830

The MILWAUKEE® SHOCKWAVE Impact Duty™ 1/2" Drive 6 Point Lug Nut Wheel Sockets feature a durable, non-marring sleeve to protect rims during tire changes. The ARMOR-GUARD™ Sleeve is made with premium, durable plastic for lasting protection against cracking or shredding during wheel installation and removals. The lug nut sockets are thin-walled for easy access in tight wheel assemblies and feature a non-marring plastic insert to protect lug nuts during use, along with our stamped & ink filled sizes for bold, long lasting markings. Our sockets are engineered with high strength forged steel for optimised performance in heavy-duty applications. The dual-hole design and ring groove allow for easy socket attachment and removal. MILWAUKEE® SHOCKWAVE Impact Duty™ Lug Nut Wheel Sockets are optimised for use with 1/2" drive impact wrenches, drivers, ratchets, and adapters and meet ASME industry standards for thin-walled sockets.

• Lug Nut Wheel Sockets feature a durable, non-marring sleeve to protect rims during tire changes
• ARMOR-GUARD™ Sleeve is made with premium, durable plastic to withstand regular wheel installation and removals
• Lug Nut Sockets feature a non-marring plastic insert to protect lug nuts during use
• Sockets are Thin Walled for easy access in tight wheel assemblies
• Sleeve holds securely during Lug Nut removals and lasts throughout the life of the socket
• Socket sizes are stamped & ink filled for the bold, long lasting markings
• Non-slip hex geometry to prevent socket and fastener rounding
• Sleeve can be removed to allow for lug nut access in tight wheel assemblies
• Dual hole design and groove allows for easier attachment
• Optimised for use with 1/2" drive impact wrenches, drivers, ratchets, and adapters

Specifications

• Type: Deep
• Drive Size: 1/2" DR
• System of Measurement: Metric
• Technology: SHOCKWAVE™

Includes

• 1 x MILWAUKEE SHOCKWAVE Impact Duty™ 1/2" Drive 17mm Lug Nut Wheel Socket
• 1 x MILWAUKEE SHOCKWAVE Impact Duty™ 1/2" Drive 19mm Lug Nut Wheel Socket
• 1 x MILWAUKEE SHOCKWAVE Impact Duty™ 1/2" Drive 21mm Lug Nut Wheel Socket

MILWAUKEE 12V/18V 4.5/6.0Ah Multi Voltage Rapid Charger M12-18FC

The 18V & 12V Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M18™ and M12™ batteries, providing an upgrade for both systems. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.

• Charges batteries up to 40% faster.
• Charges all 12V and 18V batteries.
• Sequential charging: automatically charges the second inserted pack once the first pack is fully charged.
• REDLINK™ Intelligence: charger communicates with the battery pack to ensure optimum performance and extend life
• 18V REDLITHIUM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 26 min / 47 min / 59 min / 68 min/ 95 min or less
• 12V REDLITHIUM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 28 min / 45 min / 57 min / 90 min or less

Specifications

• Platform: 12V
• Charge Time:
  • 2.0Ah: 26 minutes
  • 4.0Ah: 47 minutes
  • 5.0Ah: 59 minutes
  • 6.0Ah: 75 minutes
  • 9.0Ah: 90 minutes

MILWAUKEE 12V FUEL™ Stubby Impact Wrench Protective Boot 49162562

The M12 FUEL™ Stubby Impact Wrench Protective Boot is for use with our M12 FUEL™ Stubby Impact Wrenches (M12FIW2F120, M12FIW2P120, M12FIW2F380). This boot provides a lightweight, durable solution to protect the tool and your work surfaces. The durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to the tool motor and may void the MILWAUKEE® warranty.

• Form-fitting, light weight design protects the tool and work surface while adding minimal size or weight to the tool
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments
• Flexible material allows for easy install and removal
• Fits all M12 FUEL™ Stubby Impact Wrenches (M12FIW2F120, M12FIW2P120, M12FIW2F380)
• Not made for use with other impact wrenches

MILWAUKEE FUEL™ 3/8inch & 1/4inch High Speed Extend Reach Ratchet Protective Rubber Boot Accessory 49162569

Our M12 FUEL™ Extended Reach High Speed Ratchet Protective Boot provides a lightweight, durable solution to protect the tool and work surface while fastening and removing bolts. Designed with durable rubber components, this boot withstands corrosive materials commonly found in transportation maintenance environments. The Protective Boot is not for use on or near live electrical circuits. This Protective Boot is specifically designed for use with the M12 FUEL™ 1/4” Extended Reach High Speed Ratchet (M12FHIR14LR0) and the M12 FUEL™ 3/8” Extended Reach High Speed Ratchet (M12FHIR38LR0). Use on any other product may result in damage to the tool's motor and may void the tool's warranty.

• Shield tools from corrosive materials, preventing damage from prolonged exposure.
• Boots act as a cushion, reducing the impact of accidental drops and minimizing tool damage.
• Enhance usability and safety with features like non-slip grips.
• Protective boots preserve tool longevity, protect investments, and optimize productivity.
• Boot is only compatible with M12FHIR38LR0 and M12FHIR14LR0.