Description
- Continuous roll form – optimizes edgebanding speed whilst minimizing offcuts and wastage as experienced with short veneer strips
- Staggered finger joints – extra strength and near invisible joints
- Fleeced – strong cellulose backing eliminates splintering, splitting, cracking and breakage during edgebanding – no priming required
- Face Sanded – ready for lacquering after edgebanding
- Original natural veneer – no cheap substitutes from other species
- Wide range – over 40 species in stock
- Australian Made – all veneer edging is manufactured in Sydney, Australia
- Fleeced Veneer can be applied using a wide selection of equipment including hotmelt edgebanders (Click here for more details), hot air edgebanders for pre-glued tapes (click here for more details), ordinary household irons (for preglued stock), or by hand using contact adhesives (click here for more details).
- Most edgebanders’ trimming devices will cut Fleeced Veneer cleanly without difficulty.
- Fleeced Veneer can also be trimmed easily using a sharp blade or handheld edge-trimmer (click here for more details).
- For best results when applying unglued Fleeced Veneer edging, we recommend Hot Melt Adhesive (click here for more details).
Standard widths: | 22mm (all species) |
Other widths: | 30mm and 40mm |
Standard roll sizes: | Unglued – 100m Preglued – 50m & 100m |
Standard thickness: | 0.45mm – 0.65mm |
Non Standard species: | Minimum Order 300m – 500m apply |
Please note other widths are available upon request. Iron-On Timber Veneer Sheets are also available in a limited range of 2440mm x 305mm and 1220mm x 305mm sizes. Please contact us for availability.
Please note timber is a natural species and colours will vary depending on which part of the tree the edging has been cut from.
Additional Information
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.