Air Compressor Filter Z-20 High Performance suit Plasma Cutters WC-06255 by Weldclass

Now available with 7-year warranty. Specially developed for use with Plasma cutting machines, the PLATINUM Z-20 high performance Air Filter is a superior alternative to traditional "roll" type filters. PLATINUM Z-20 will filter water, dust, oil and particles down to 1-micron and is virtually maintenance-free thanks to the self-draining feature and super long-life filter cartridge/element.
Using a Z-20 filter will help to increase plasma consumables life, reduce operating cost, improve cutting performance & reduced the likelihood of torch & machine malfunction.
A highly recommended accessory for all plasma cutters.. & other applications where air quality is critical.
Click here to read why proper air filtration is critical for plasma cutting, and how the PLATINUM Z-20 compares to other filters.

WHY USE PLATINUM Z-20 AIR FILTER ? 

•  7-Year Warranty*
•  Increases Plasma torch parts life & reduces consumable costs 
•  Improves cutting performance 
•  Self-draining - engineered for low maintenance, “set and forget”
•  Long-life filter cartridge (typical service life of up to 6 months)
•  High-performance filtration of water/moisture, dirt and oil particles down to 1-micron
   

 SUPERIOR TO "ROLL" TYPE FILTERS:

• Roll filters require frequent cartridge replacement = ongoing cost 
• Z-20 filter cartridge lasts up to 6 months, or even 12+ months in cases of infrequent use = reduced cost
• Roll filters are NOT self draining. If cartridge is not replaced regularly, this can cause issues such as mould, restriction in air flow, etc 
• Z-20 is self-draining and maintenance-free = no hassles 
   

WHY USE Z-20 FILTER IN ADDITION TO THE FILTER/REGULATOR THAT CAME WITH MY PLASMA?

• Standard filter/regulators supplied with most modern plasma cutters provide a basic/minimum level of filtration, and typically remove around 50% of water & dirt particles.
• Z-20 filter removes 99.97% of water, dirt & oil particles, significantly improving air quality and delivering the benefits mentioned above 
   

MOUNTING INFORMATION:

• Supplied with Nitto socket, Nitto plug, and 1/4" nipple/joiner to allow quick "inline" connection to existing air inlet on plasma cutter 
• Optional mounting bracket (WC-06257) can be used where filter is required to be mounted rigidly to a vertical surface Click here to read why proper air filtration is critical for plasma cutting, and how the PLATINUM Z-20 compares to other filters.