Description
High Quality Veneer Edging for application directly onto wooden substrates such as particleboard, MDF (fibreboard) and plywood - Suitable for Hot Melt Edgebanders or Manual Edgebanding using Virutex AG98R or Iron or other traditional means.
We have the largest range of stocked Edging in Australia supplied by quality manufacturers. We offer Edging Solutions for all users (DIY, Hobbyists, Micro Trade Users through to High Industrial Cabinetry / Furniture makers). We offer Cutting and Pre-Gluing facilities for all of our edging in addition to all the stocked lines - please refer to our Edging Services for more details.
Please note we have a larger range of Veneer Products in 0.4mm and 2mm Thickness and larger Roll Sizes.
Suggested Applications:-- Shelving
- Stereo speaker boxes
- Hobby craft
- Cabinets & cupboard doors
- Renovation of old furniture
Note - Iron-on Timber Veneer Edging is not recommended for application onto metal, glass, or other sealed surfaces.What else will you need?A stiff-bristled brush; Brown or grease proof paper (not vital); A hard roller or flat wooden block (palm-sized); A router, fine file, chisel, or utility knife; Fine sandpaper; Timber stain/lacquer.If applying Iron-On Melamine Edging to laminate or painted surface: Coarse sandpaper and/or paint stripper.
Preparation:-
- Substrate Surface – Remove laminate or paint using coarse sandpaper and/or paint stripper. Clean-up substrate surface using stiff-bristled brush.
- Iron-on Timber Veneer Edging – Measure and cut edging allowing 10mm overlap on each end.
- Domestic Iron – Turn off steam function. Set iron to high heat (cotton setting).
- Position Edging – Lay edging over substrate allowing equal overlap ona ll sides for trimming.
- Cover Edging (not vital) – Cover edging strip with brown or grease proof paper to protect surface of edging from excessive direct heat from iron. (see illustration A)
- Iron-on – Use on hand to guide and keep edging in position. Starting at one end, iron back and forth. Slowly continue forwards. (see illustration A)
-
Follow-up Pressure – Rub wooden block or push roller back and forth immediately after ironing (whilst edging and adhesive still warm) to keep edging in contact with substrate surface as adhesive cools. (see illustration B)
- Note - If result is not acceptable, re-work by repeating steps 3 and 4.
- Trimming – Ideally use a router. Alternatively: With fine file - Move file at close angle (15 º) to surface of board. With chisel or utility knife - Work along surface of substrate. Trim carefully to avoid damaging surface of substrate. In all cases, work away from edging towards surface of substrate to stop edging pulling away.
- Finishing – If required, fine sandpaper trimmed edges to smooth finish. If desired, Iron-on Timber Veneer Edging can be stained. Apply any standard timber finish.
Additional Information
Model
Type
Edgebanding Tape - Veneer
SKU
8703665
Part Number
253-617
Barcode
9313815350576
Brand
Consolidated Veneers
Size
22mm x 0.4mm
Technical - Main
Colour Name
Pacific Maple
Edging - Base Material
Natural Veneer
Edging - Surface
Veneer (Natural Timber)
Edging Thickness
0.4mm
Edging Width
21-22mm
Roll Size
5METERS
Packaging + Shipping
Shipping Weight (Gross)
0.2kg
Product Specification Disclaimer
Product Specification Disclaimer
Product Specification Disclaimer
The specifications provided on our product pages are obtained from various manufacturers and third-party sources. While we strive to ensure that the information is accurate, we do not warrant or guarantee its accuracy, completeness, or timeliness. Therefore, we cannot be held liable for any errors, omissions, or discrepancies in the specifications provided.Please note that product specifications are subject to change by the manufacturers without notice. It is recommended to verify the specifications with the manufacturer or seller before making a purchase decision.In the event of any discrepancy between the product specifications on our website and the actual product, the latter shall prevail.We reserve the right to update, modify, or remove product specifications at any time without prior notice.
5m x 22mm x 0.4mm Pre-Glued (Iron-on) (Hang Sell Pack) Pacific Maple Timber Veneer Edging by Consolidated Veneers
$15.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Sale
Save 33%
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom $6.00
Regular price$9.00
In stockSave 35%
Kincrome
*Limited Edition* Kincrome 4Pce Christmas Bon Bon Pack P4111
Sale price$17.00
Regular price$26.00
Only 2 units leftSave 23%
Viking Arm
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Sale priceFrom $175.00
Regular price$227.00
In stockSave 13%
Midwest
Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
Sale price$71.00
Regular price$82.00
In stockSave 48%
Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price$97.00
Regular price$188.00
In stock, 17 unitsSave 19%
Save 29%
Leatherman
Multi-Tool, 13 in 1 Plier REV - YL832129 by Leatherman
Sale price$65.00
Regular price$91.00
Re-stocking soonSave 35%
Kincrome
Kincrome 14 Piece Permanent Marker Case Set P11898
Sale price$11.00
Regular price$17.00
In stockSave 67%
Sontax
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sale price$2.00
Regular price$6.00
In stock, 302 unitsSave 67%
Save 43%
Rikon
250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
Sale price$259.00
Regular price$454.00
In stockSave 10%
You may also like
Recently viewed
Let customers speak for us
Charlotte M.
All as expected! :-)
Items came swiftly and communication was perfect. All is well.
Arbortech SpheroPlane™ (AU + UK) Carving Attachment with Sanding Kit SPP.FG.1000.00
Vicky M.
Awesome Saw
Looks great and well made. Will do the job it was bought for.
One Man Crosscut Saw by Lynx
Herry T.
Viking Arm
Good discounted price, that's what I waited for.
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Raymond S.
Amazing service from Beyond Tools
The team at Beyond Tools are legends at their customer service, fast response and they go the extra mile
1000Pce Hospa / Stemfix Stem Screw Cover Caps
R.J.
10/10
M18 & M12 Rapid Charge Station M12-18C3 by Milwaukee
R.J.
Brilliant
PACKOUT™ 2 Drawer Tool Box 48228442 by Milwaukee
Tony R.
Range and price
The range on offer is complete, the prices are god, and the items were well packed and delivered promptly. All good.
Beyond Tools
Tony R.
Great quality
Abbot & Ashby every time if you want quality that works and lasts.
Mop Polishing Loose Leaf (50 Fold) by Abbott & Ashby
Toby V.
Exactly what I was looking for. A company in the states use an almost identical knife under a different brand name, minor differences, nothing impactful. This has been the knife I have used for work for 10+ years. I keep 2 on hand in case something happens to my daily use one. I will gladly pay the exchange and shipping cost to keep using what works so well for me.
Folding Utility Knife Tri Blade K6101 by Kincrome
Duncan W.
Patients reaps rewards
Excellent product Excellent price just needed to wait a little longer for them to arrive, but that's no problem really.
Sicut Thrower Knife - Black - Set of 3 with Sheath SC6THSET3BK by AOS
Steve T.
Bandsaw and Drill press order
The ordering and delivery process was very straightforward, very happy with the products I ordered. Great service from Beyond Tools, I will use them again.
Beyond Tools
greg i.
Oscillating bobbin spindle
I have been chasing additional bobbins for years. The original seller did not offer additional spindles.
Beyond tools is able to supply additional spindles. Great
Bobbin Spindle Assembly suit Oscillating Bobbin / Spindle Sanders
Robert e.
Great service
We purchased from beyond tools as we were struggling to locate some brass items in the UK and Europe, we got a great prompt service.
Beyond Tools
Robert e.
Great product
Great service and range of products
1Pce 72mm X 5.5mm x 12mm Full Mortise Solid Brass Box Stay STAY03
Robert e.
Great product
The mini hinges are good quality and the service was prompt considering we are in the United Kingdom.
1" x 3/4" 10 pairs Solid Brass Polished Butt Hinges by Hardware for Creative Finishes
