Description
19L Titebond II Premium Wood Glue
Weather proof bond suitable for wood to wood bond where moisture is present. A shelf stable, one part (pre-catalysed) cross-linking PVA adhesive. It is recommended for high frequency and hot or cold press, edge and face gluing and finger joint applications. With its very fast setting rate, viscosity stability and high percentage solids, Titebond Premium II can also be used for a variety of assembly gluing applications. It develops a DIN EN 204 D3 water-resistant bond with a light-coloured glue line. Ideal for making block chopping boards is is approved for indirect food contact by FDA USA.
Features:-
Bond strength Green Seal GS-36 Woodworking Glues
The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs).
Bond strength ASTM D905 (on hard maple)
This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives
Bond strength ASTM D4236
This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect
Bond strength ANSI/HPVA Type II Water-Resistance : Wood glues
Type II testing is a soak test, involving cutting the 150 x 150mm glued block assemblies into 50 x 125mm specimens, soaking them for 4 hours, then baking in a 120 °F oven for 19 hours. This is repeated for a total of three cycles, and the bonds must not de-laminate to pass the Type II specification. Also similar to D2 European standard testing.
Application Guidelines:-
Material Data Specifications:-
- First one-part wood glue to pass ANSI Type II water-resistance ( passes the soak test)
- Minimal joint creep
- Designed for exterior use
- Excellent sandability
- Unaffected by finishes
- FDA approved for indirect food contact
- Ideal for radio frequency (R-F) and hot press gluing systems
- Easy cleanup with water
Type | Cross-linking polyvinyl acetate |
State | Liquid |
Colour | Honey Cream |
Dried film | Translucent Yellow |
Solids | 48% |
Viscosity | 4,000 cps |
Storage life | 24 months in tightly closed containers at 24 °C |
Calculated VOC | 3.0 g/L |
Weight per gallon | 4.17kg |
Chalk temperature | Approximately 13 °C |
Flashpoint | > 93 °C |
Freeze/thaw stability | Stable |
pH | 3.0 |
Application Temperature
Above 13 °C.
Open Assembly Time
3-5 minutes (21 °C./50%RH)
Total Assembly Time
10-15 minutes (21 °C./50%RH)
Minimum Required Spread
Approximately 6 square meters per litre
Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:-
Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 12.7 °C. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Additional Information
19L Titebond II Premium Wood Glue
$201.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Spring Sale
Save $3.00
Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom $6.00
Regular price$9.00
In stockSave $3.00
Virutex
AU93 Double Edge Trimmer And Scraper + RC21E Manual End Trimmer Set 2800086 by Virutex
Sale price$44.00
Regular price$47.00
In stockSave $20.00
AOS|Sicut
4Pce Sicut Diamond Fisherman Package White Handle Knife Set SCKPFMDMW by AOS
Sale price$94.00
Regular price$114.00
In stockSave $21.00
Rugged Xtremes
Large Wheeled FIFO Transit Canvas Bag RX05C131W by Rugged Xtremes
Sale price$147.00
Regular price$168.00
In stockSave $2.00
Hardware for Creative Finishes
20Pce 150mm 6 Hole Hook and Loop Abrasive Discs by Hardware for Creative Finishes
Sale priceFrom $10.00
Regular price$12.00
In stockSave $7.00
Midwest
Offset Aviation Snip 3Pce Set MWT-6510RLS by Midwest *Limited Edition*
Sale price$84.00
Regular price$91.00
In stockSave $14.00
Rugged Xtremes
Medium Workmate Tool Bag RX05B512PUBK by Rugged Xtremes
Sale price$107.00
Regular price$121.00
In stockSave $27.00
Lynx
Two Man Crosscut Saws by Thomas Flinn & Co
Sale priceFrom $254.00
Regular price$281.00
In stockSave $4.00
Virutex
Square Edge Double Edge Trimmer & Scraper AU93 by Virutex
Sale price$17.00
Regular price$21.00
In stock