19L Titebond Original Wood Glue

19L Titebond Original Wood Glue Titebond Original is the fastest setting, high-quality aliphatic resin emulsion adhesive. It dries very rapidly to give a short clamp time and has high solvent-resistance. Original is excellent for sandable general purpose assembly for particle board, MDF, plywood and other porous materials as well as edge and face gluing of hardwoods and softwoods. It is preferred by musical instrument makers around the world. Features:-

• Fast set – Shortens clamp time
• Bonds stronger than wood
• Minimal or no creep
• Solvent-resistant
• Excellent sandability
• Unaffected by finishes
• Easy cleanup with water
• FDA approved for indirect food contact
• Perfect for assembly where short cure and open time is desired

Physical Properties:-

Type	Aliphatic resin emulsion
State	Liquid
Colour	Yellow
Dried film	Translucent
Solids	46%
Viscosity	3,200 cps
Storage life	24 months in tightly closed containers at 24 °C
Calculated VOC	10.7 g/L
Weight per gallon	4.17kg
Chalk temperature	Approximately 10 °C
Flashpoint	> 93 °C
Freeze/thaw stability	Stable
pH	4.0

Bond strength Green Seal GS-36 Woodworking Glues The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs). Bond strength ASTM D905 (on hard maple) This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives Bond strength ASTM D4236 This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect Application Guidelines:- Material Data Specifications:-

• MSDS
• Data Sheet