237ml Titebond II Premium Wood Glue

237ml Titebond II Premium Wood Glue Weather proof bond suitable for wood to wood bond where moisture is present. A shelf stable, one part (pre-catalysed) cross-linking PVA adhesive. It is recommended for high frequency and hot or cold press, edge and face gluing and finger joint applications. With its very fast setting rate, viscosity stability and high percentage solids, Titebond Premium II can also be used for a variety of assembly gluing applications. It develops a DIN EN 204 D3 water-resistant bond with a light-coloured glue line. Ideal for making block chopping boards is is approved for indirect food contact by FDA USA. Features:-

• First one-part wood glue to pass ANSI Type II water-resistance ( passes the soak test)
• Minimal joint creep
• Designed for exterior use
• Excellent sandability
• Unaffected by finishes
• FDA approved for indirect food contact
• Ideal for radio frequency (R-F) and hot press gluing systems
• Easy cleanup with water

Physical Properties:-

Type	Cross-linking polyvinyl acetate
State	Liquid
Colour	Honey Cream
Dried film	Translucent Yellow
Solids	48%
Viscosity	4,000 cps
Storage life	24 months in tightly closed containers at 24 °C
Calculated VOC	3.0 g/L
Weight per gallon	4.17kg
Chalk temperature	Approximately 13 °C
Flashpoint	> 93 °C
Freeze/thaw stability	Stable
pH	3.0

Bond strength Green Seal GS-36 Woodworking Glues The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs). Bond strength ASTM D905 (on hard maple) This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives Bond strength ASTM D4236 This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect Bond strength ANSI/HPVA Type II Water-Resistance : Wood glues Type II testing is a soak test, involving cutting the 150 x 150mm glued block assemblies into 50 x 125mm specimens, soaking them for 4 hours, then baking in a 120 °F oven for 19 hours. This is repeated for a total of three cycles, and the bonds must not de-laminate to pass the Type II specification. Also similar to D2 European standard testing. Application Guidelines:- Material Data Specifications:-

• MSDS
• Data Sheet