Description
Square Edge Jig SE-77 by Tormek
With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE‑76 jig. It has been provided with an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other.
The jig's construction also makes it possible to position and sharpen tapered chisels, e.g. Japanese chisels. The safety stops keep the jig securely on the Universal Support and prevent the tool from sliding off the grindstone, so there is no risk that you will hurt your fingers when sharpening. The jig fits wood chisels and plane irons up to 77 mm (3") width.
When sharpening a convex shape, center the tool under the jig's center line mark.
The more you loosen the adjustment knobs A and B, the greater the pendulum motion you get, which increases the convexity.
Sharpening a convex shape
Most types of plane irons can benefit from a slight convex shape. The degree of camber depends on the type of plane and should be approximately the same as the thickness of the shavings. Thanks to the adjustable side on the SE-77 jig, you can achieve the optimal convex shape for your tool.Steady mounting and safe grinding
The jig lines up the tool to its upper and flat side. Thanks to the jig's shoulder (A), it is easy to mount the tool correctly at 90 °. The clamping pressure from the ridge in the centre is distributed to the edges, which gives a steady positioning of the tool in the jig, without having to force the locking. Patents: SE 531 802, EP 1987916, US 9789583, U.S. Des. D651,884 SAdditional Information
Model
Type
Sharpening Jig
SKU
8721005
Part Number
SE-77
Barcode
7392485005049
Brand
Tormek
Packaging + Shipping
Shipping Weight (Gross)
1.48kg
Product Specification Disclaimer
Product Specification Disclaimer
Product Specification Disclaimer
The specifications provided on our product pages are obtained from various manufacturers and third-party sources. While we strive to ensure that the information is accurate, we do not warrant or guarantee its accuracy, completeness, or timeliness. Therefore, we cannot be held liable for any errors, omissions, or discrepancies in the specifications provided.Please note that product specifications are subject to change by the manufacturers without notice. It is recommended to verify the specifications with the manufacturer or seller before making a purchase decision.In the event of any discrepancy between the product specifications on our website and the actual product, the latter shall prevail.We reserve the right to update, modify, or remove product specifications at any time without prior notice.
See Notes
Comparable Products Disclaimer
Comparable Products Disclaimer
Our product comparisons are based on our first-hand experiences and knowledge of models we've sold in the past. We aim to provide objective and accurate information to assist you in making informed decisions. We do not receive compensation for featuring products in our comparisons. For more details on our disclosure practices, please click here to view the full disclosure statement.
See Notes
Electrical Specifications (Important for International Customers)
Electrical Specifications (Important for International Customers)
Electrical Specifications (Important for International Customers)
Electrical Specifications (Important for International Customers)All power tools and machines sold by Beyond Tools are designed to operate on 230V / 50Hz electrical systems as standard in Australia.These products are supplied with Type I Australian power plugs.If you are purchasing from outside Australia, particularly from regions using 110V–120V systems (e.g., USA, Canada), you will require a step-up transformer or region-appropriate model.Please consult a qualified electrician before using voltage converters to ensure safe and correct operation.Disclaimer: Beyond Tools is not responsible for any damage, malfunction, or safety risks resulting from the use of products outside their intended voltage range or with incompatible electrical systems.
See Notes
What's Included

Square Edge Jig SE-77 by Tormek
$99.00
Optional Accessories
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
hidden
Shop Sale
Save 45%


Liquid Laminate
15ml Bottle of Acrylic Liquid Laminate
Sale priceFrom $6.00
Regular price$11.00
In stockSave 28%


Viking Arm
Viking Arm® Hand Held (One-Handed Assembly Tool) Jack Clamp - Each
Sale priceFrom $165.00
Regular price$230.00
In stockSave 13%

Midwest
Offset Aviation Snip 2Pce Set MWT6510C by Midwest *Limited Edition*
Sale price$72.00
Regular price$83.00
In stockSave 49%


Rikon
*Shop Soiled* 200mm (8") Variable Slow Speed Bench Grinder 80-800VS by Rikon
Sale price$98.00
Regular price$191.00
Only 2 units leftSave 33%

Kincrome
Kincrome 14 Piece Permanent Marker Case Set P11898
Sale price$12.00
Regular price$18.00
In stockSave 7%



Virutex
Virutex Portable Hand Held Hot Air Edgebander 240V for Pre-Glued Edging AG98R
Sale price$427.00
Regular price$459.00
In stockSave 4%


Kincrome
150Pce Portable Workshop Tool Kit K1875 by Kincrome
Sale price$361.00
Regular price$378.00
In stockSave 12%


Dremel
12V 3.0Ah Rotary Tool 8260-5 (F0138260NA) by Dremel
Sale price$155.00
Regular price$176.00
In stockSave 43%


Rikon
250mm (10″) Benchtop Bandsaw 0.33HP 240V 10-305 by Rikon
Sale price$262.00
Regular price$459.00
In stockSave 67%

Sontax
Drill Buddy Dust Catcher / Collector 90900 by Sontax
Sale price$2.00
Regular price$6.00
In stock, 287 units